fbpx
Scroll to top

PC & MAC Setup Guide

Install Nemonic program on your PC/Mac to print your labels and memos

Nemonic Operation, Windows Installation, Mac Installation, Using Templates, Using tools, Printing

Related Frequent Questions

Printer Error

The printer stops after some consecutive printing.

If the printer gets overheated due to consecutive printing or continuous printing of sheets mostly consisting of dark color, the printer detects overheating & blocks printing temporarily.
Wait until the printer cools down. It will resume printing once it falls below a certain temperature.

 

 

Printer Error

The printer stops after some consecutive printing.

If the printer gets overheated due to consecutive printing or continuous printing of sheets mostly consisting of dark color, the printer detects overheating & blocks printing temporarily.
Wait until the printer cools down. It will resume printing once it falls below a certain temperature.

 

Install (Windows)

I installed the PC driver, but I cannot print.

Check that the power of the Nemonic printer is turned on. Check that it is correctly connected to your PC through the USB connection.
If it still does not work, click on the Windows key, search “Device Manager.” Check if there is “USB Printing Support” under “Universal Serial Bus Controllers.”

 

Install (Mac)

When I request to print from the memo program, a warning message appears: Please check if the Nemonic print driver is installed.

If a warning message appears as below when you request to print immediately after installing the program, check the system as follows:

 

MS Office (Windows)

The content created from a Microsoft Office program is printed as cut off in the middle.

If the content created from a Microsoft Office program is printed as cut off in the middle, or a blank copy comes out, check if the paper setting is incorrect.
Unless otherwise set, it is set to 3” x 3” by default. Change it to the size of the paper inserted in the printer.

 

MS Office (MAC)

The content created from a Microsoft Office program is printed as cut off in the middle.

If the content created from a Microsoft Office program is printed as cut off in the middle, or a blank copy comes out, check if the paper setting is incorrect.
Unless otherwise set, it is set to 3” x 3” by default. Change it to the size of the paper inserted in the printer.

 

Do you have any questions about using the program?